To do this you would set your PC to the following network settings; IP address -192.168.1.10. sub-net -255.255.255.000. default gateway -192.168.1.1. As the camera in most cases is set for 192.168.1.64, when you login to the camera using a browser the first thing you should see if the camera has not been activated is a popup asking for you to System > System Settings > Time Settings. Select your time zone and also press the “sync with the PC” button to automatically set the correct time; 2. Go to Network > Advanced Settings > Wi-fi. Note – your router has to work on 2.4 g wave. Pick your network and type in your wi-fi password below and press save. Sep 23, 2016. #339. This android App will generate a Serial code which you may use to reset the admin password for a Hikvision camera DVR and NVR The code must be entered into the Hikvision SADP tool in the Serial code box or directly in local menu. Android App : Hikvision DS-2CD1153G0-I 5 MP Fixed Dome Network Camera. Products. HiLook IP Products Hikvision License Activation. Hikvision App Store. See All . Partners. Note: All DVR/NVR/IP camera models are no longer shipped with a default password after a certain revision of firmware. The Secure Activation feature is deployed in the following firmware revisions: Device Type Answer: Yes, you can configure the device by going to the device management page, and finding your device. There should be a remote configuration button that looks like a cog wheel. Click this and hit "basic configuration" to get to the normal configuration screen, on most firmware versions it will look like the web interface. Note: This will The first method is to activate and connect IP camera. Connect the camera to the computer network adapter, change network settings so that the adapter and the camera were the same subnet. Open a browser and enter the IP address of the camera. If the IP address is entered correctly, the window for setting password: Next you need to create a Plug in the monitor via a VGA or HDMI cable to the NVR. Connect an ethernet cable from the NVR to the modem (if you wish to do remote viewing). Turn on the NVR & Monitor – you should see a setup screen. Ensure you write down the username / password you choose. Its a pain in the bum to reset. After setup, you should see your cameras on the screen! Problems with the P2P connection on a NVR SAFIRE/Hikvision: Troubleshooting. 1. Make sure the device connects to the wired or wireless Internet successfully. 2. Check the device's TCP/IP settings, make sure the network parameters, including the DNS server address, are set correctly. The DNS server should not be empty and it is suggested that it Hikvision Europe Dirk Storklaan 3, 2132 PX Hoofddorp, The Netherlands Tel: +31-23-5542770 Fax: +31-23-5631112 SOTYzk.